监控连接器——类似于ConnectedView的屏幕伴侣
Monitor Connector like ConnectedView ScreenBuddy
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
A friend of mine found a gadget that helps aligning two monitors together. But at the time it did cost around 50€, which I found a lot. So as a little surprise, I designed and printed a similar gadget. Maybe someone will find this helpful!
The tolerance for the hinge is 0.5mm with a length of 20mm for each of the two pins and diameter of 4mm, as this worked best on my printer. I attached the Fusion file, so you can change the parameters if needed.
Print Settings
- Printer brand:
Creality
- Printer:
Ender 3
- Rafts:No
- Supports:Yes
- Resolution:0.2
- Infill:20% but any should work
- Filament brand:
Creality
- Filament color:
Black
- Filament material:
PLA
- Notes:
Nozzle: 200°C
Bed: 60°CSupports are needed below the hinges, just make sure there are no supports inside the hinge!
License
Monitor Connector like ConnectedView ScreenBuddy
by Spanching is licensed under the Creative Commons - Attribution license.
相关内容
猜你喜欢
联系我们
热门推荐
-
GOPO Mik-1 投掷器2023-03-26 -
斯特里博斯蝴蝶锁支撑结构2024-01-02 -
Panasonic Lumix GX8 前置旋转环2024-03-21 -
120毫米蜂窝滑板轮，适用于38毫米轴（未测试）2024-04-23 -
魔杖2024-05-06
最热下载
-
通用型1/10比例底盘 - DKS基础款2023-03-26 -
QC USB充电器外壳（XFW-KC42-4）2024-01-17 -
克利普施 Promedia 2.1音量Pod模拟机器架（铝制支架）安装基座2024-04-29 -
沙箱建筑模型2024-05-08
最新模型
-
Flick 19E（增强型） - 可使用的玩具枪 - 类似弹弓的橡皮筋枪2025-08-21 -
Myuto Flick 19X - 可工作的玩具枪（橡皮筋弹弓状枪）2025-08-17 -
性感美女3d人像（带基座）2025-07-17 -
系带3D凉鞋（儿童款）2025-07-16 -
一体打印行星齿轮2025-07-15