美国空军PMEL项目EMU探测器支撑架v4

USAF PMEL EMU Probe Mount v4

2023-08-08 20:51:11

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is the latest iteration of the USAF PMEL EMU temperature and humidity probe mounts to ensure reliable, accurate, and safe ECS readings in your lab. No more dangling probes from benches or ceilings, no more big excessive stands with mounts built in. This latest version moves the probes off to the side of the unit to avoid heat from the screen affecting readings.

To attach this probe mount, remove the top right screw in the back of the EMU holding the screen in place, then slide the mount in place so that it snaps into the spot where the screw normally sits, then return the screw in place on top of the mount and tighten it down to secure it.

Print at 100% infill with supports. Use small pliers to remove the supports outside of the circle, and a punch to carefully pop the supports out from the inside of the circle.