3dsjs

美国童军协会3D光线盒模型

Scouts BSA Light Box

2024-05-03 16:17:17

使用说明

  1. 所有模型资源均由用户上传分享,内容来源于网络公开资源
  2. 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
  3. 模型将通过邮件发送(5分钟内自动发送),感谢理解带宽压力,超过1小时没收到,请联系我们
关于费用

我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!

扫码手机访问
抖音私信 @jobsfan

Summary

Made a light box out of the Scouts BSA logo for a fundraiser event.

Face prints at 0.2mm height and uses red, blue, white and black (from the 3MF).

Base prints at 0.28mm height (except 37-40mm which should be printed at 0.2mm height) and uses black, silk silver, and natural/glow-in-the-dark.

Mounting studs for a D1 Mini are in the base. Both have a cut-out for a USB-C insert, one has an additional hole for mini SPST switch. Uses two M1.7 self-tapping screws to hold the two pieces together (unless you want to use adhesives).

Tuned printing profiles and more detailed build instructions available over onMakerworld.

Print Settings

  • Printer brand:

    Bambulabs

  • Printer:

    Bambu X1C

  • Rafts:
    No
  • Supports:
    Doesn't Matter
  • Resolution:
    0.2 and 0.28
  • Infill:
    20% Aligned Rectilinear
  • Filament brand:

    eSun; FilaCube

  • Filament color:

    Red, White, Blue, Black, Silk Silver; Natural

  • Filament material:

    PLA+; HT-PLA+

Tags

License

CC BY-NC-SA

Scouts BSA Light Box
byRevHazlettis licensed under theCreative Commons - Attribution - Non-Commercial - Share Alikelicense.

美国童军协会3D光线盒模型
朋友,你觉得上面这个模型,属于下面的哪个分类?
必须全中文,且长度不超过15