螺纹插入式热压机

Threaded Insert Heat Press

2023-08-08 22:12:07

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

ADDED .step file for Iron Holder for customisation.
ADDED 3MF FILES**

This design is a simplified version of the press I use on a daily basis and can be printed in regular PLA.
The top assembly is complicated but it’s worth the assembly effort.
When you release the soldering Iron it will rise on its own and come to a gentle stop.

The Base Extension is optional but is adjustable so adds more versatility.

All Parts are in correct orientation for printing.

The Base for the top assembly should be printed with support.

Print the Rear Carriage and Weight with 99% infill so they are as heavy as possible. Choosing 100% infill will significantly increase print time on slower machines as infill is printed faster than inner and outer walls.

EDIT:
I recommend printing with PLA+ as it’s stronger than regular PLA but still affordable.
The base is best printed with high infill as the weight will give the whole model more stability.
I print the base at 99 infill, however this uses approximately 400g of filament so it is your choice.

The belt clips are best printed on their sides with support to give the printed part more strength.

ADDITIONAL HARDWARE.
M3 countersunk screws 8-10mm
M4 Socket Cap screws 8-10mm
M4 Washers
M4 T-Nuts
3x Standard Bearings 8x22x7, also known as skateboard bearings.
Soldering Iron + optional heat set tips.
3D Printer Timing Belt. (Any generic will do, I have used one from an ender 3)
2040 aluminium profile 300mm
V Slot Wheels
Blue Threadlock (optional)

After assembly adjust screws in front and rear carriage wheels to dial in the rate of return.

Print the top part of the base extension as well as the extension locators and carriage stops in 95A TPU for best results.

The original “Deluxe” Version is now available on 3dCults.
It functions the same as this free version. The differences are aesthetic only.
It does however look great! Especially if you print the face plates with a textured PEI bed.
https://cults3d.com/en/3d-model/tool/threaded-insert-heat-press

Questions/Guidance feel free to drop me a message.

Happy Printing!

I’m Putting together a build tutorial on YouTube shortly.
Copy the link below to view a 3D Model of the original version to help with assembly.

https://collaborate.shapr3d.com/v/UkNmziB2Q-Z3G-jSszYVb
*note, above link will not work on many phones. PC or iPad should be fine.

Edit: 25th august 2023

Files Now Have better orientation for slicing.
As Requested, the Phoenix Logo cutout is now available as an option to print.
This is designed to sit underneath the TPU cover on the base extension which also has a cutout.

Edit: 1st September 2023

Added Missing Rear Carriage
Added 3mf Files
Added Cable Guide for Base. (Print this in TPU 95a for best results)

Any Issues please message me, I’ll be happy to help.

Print Settings

Rafts:
No
Supports:
Yes
Infill:
Various
Notes:
This is a simplified version that it easier to print and assemble.
The Original “Deluxe” version is available at 3dCults.com
https://cults3d.com/en/3d-model/tool/threaded-insert-heat-press