8位计算机灵感壁灯

8 Bit Torch - Video Game Inspired Wall Sconce

2023-08-09 04:55:18

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a FULL SIZE torch coming in at a whopping 18" long. You'll need to print this in 4 parts but only the body and interface need to be glued together with a few drops of super glue. The torch uses a standard hanging lamp cord, I used the hemp rope style which goes with the dungeon motif. https://amzn.to/43LTi4r You can use any standard E26 style bulb in it but I recommend a flicker bulb for the full effect something like https://amzn.to/3KlnWLk will work well and give you the flicker you see in video games.

Print Settings

Notes:
Unfortunately the flame model does require some minimal supports to print. Tree supports or very minimal support (5-10%) is all that is required so you get a good bridge at the top. If you have a printer with good bridging you can attempt it without supports at all.

You will need to clean up the base of the flame as well. I used a deburring tool on all sides that insert, including the bottom. Elephant footing will prevent it from going in all the way, just trim it with the deburring tool and it will go right on.

I printed with .2 layer heights and 3 walls. Where needed I included 10% infill but the majority of it is walls which results in a a solid print.

Custom Section

I saw a number of similar models out in the space but most were "night lights" this is a full sized sconce and is quite impressive once fully assembled. Super glue is required for the interface part to the main body. Just use around the inside where they connect. I had it together in 2 minutes.

Mount the mounting bracket with two screws onto the wall, then simply slide the assembled torch over the mount. Gravity keeps it in place and easy to remove so you can pop in a new light bulb after the many hours of light and joy this print will bring you.

Please remember if you want to sell this in your etsy shop or other retail outlet you need a Thangs subscription. If you're building one for yourself its 100% free! Have fun and post your makes!