超级计算机支撑架
HTPC Riser Feet
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
For my living room HTPC, I thought that the tiny rubber feet on my case wasn't allowing for enough airflow underneath it, to the GPU fans. So I quickly whipped up these feet. I sanded, primed and painted them, but that was honestly unnecessary.
I used some thin two sided adhesive to bind it to my HTPC. I also got some kinda sticky rubber pad stuff on Amazon that I used for the foot to make it grippy.
Printed in PLA on an Anycubic Neo 2 at 0.2mm layer height. The PLA really seems to be strong enough, but if you're concerned, then maybe go with PETG.
Tags
License
HTPC Riser Feet
by Lamerak is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
相关内容
猜你喜欢
联系我们
热门推荐
-
复古风格闹钟架2023-03-26 -
奥迪康 Gun4IR 侧边按钮触发模块2023-05-23 -
Daisy小雏菊开花装饰2025-06-26 -
超清乌龟鱼缸2024-05-04 -
娜奥米·吴设计的胸罩3D模型2024-05-04
最热下载
-
Valorant 杰特的姿态2023-03-26 -
螺旋齿轮玩具3D模型2023-03-26 -
通用型1/10比例底盘 - DKS基础款2023-03-26 -
安益卡通 i3 迷你 HGX 轻量挤出器2024-04-21 -
巴黎卢浮宫的三圣母像2025-07-16
最新模型
-
hgx挤出机头火炮响尾蛇 X3 SWX3 HGX lite 2.002025-07-18 -
戴森V6真空吸尘器配件壁挂支架2025-07-17 -
女式凉鞋2025-07-16 -
丰满跪姿美熟女2025-07-16 -
真实玩偶 / 镶有凸圆形玻璃参数的眼睛2025-07-15