RAV4后排扬声器适配器(1996-2000)
RAV4 Rear Speaker Adapter (1996-2000)
2023-08-18 17:32:47
使用说明
- 所有模型资源均由用户上传分享,内容来源于网络公开资源
- 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
- 模型将通过邮件发送(5分钟内自动发送),感谢理解带宽压力,超过1小时没收到,请联系我们
关于费用
我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!
扫码手机访问
抖音私信 @jobsfanSummary
This is an adapter to use an aftermarket 6.5" round speaker in place of the OEM speaker without any cutting/drilling The adapter does add some thickness, and depending on the brand of speaker you use it could be close or touch the interior panel.
Print Settings
- Printer brand:
Creality
- Printer:
CR-10S
- Rafts:Doesn't Matter
- Supports:No
- Resolution:.2-.6
- Filament brand:
Any
- Filament material:
PETG/PLA+
- Notes:
I used PETG, last several months no issue. reprinted new design in PLA+/Pro and it also seems to do just fine.
License
CC BY
RAV4 Rear Speaker Adapter (1996-2000)
by buildradstuff is licensed under the Creative Commons - Attribution license.
朋友,你觉得上面这个模型,属于下面的哪个分类?
必须全中文,且长度不超过15
相关内容
猜你喜欢
联系我们
邮箱: 289047960@qq.com
热门推荐
-
DIY手工制作情绪灯光——Solumen,由SolipsFilm设计2023-03-26
-
微复形脚部模块2023-03-27
-
2023年度EDC手镯饰品2023-05-10
-
《传说之刃》:王国之泪大师剑基准偏移连接2023-08-19
-
FrSky X 20 S FPV屏幕持有器 + 三脚架适配器(橡胶带)2024-01-10
最热下载
-
钥匙扣2023-03-26
-
鸡蛋绘画机迷你(Eggbot衍生版)v1.12025-07-16
-
布恩小恐龙:阿尔洛撕齿兽UpKit - 3DKitbash网2023-03-27
-
Wolf系列手机支架2025-07-16
-
Ubiquiti UniFi AC Pro 无线接入点支架2024-04-21
最新模型
-
Wii 遥控器(同步按钮)3D模型2024-05-08
-
兽人轮毂:专为28毫米比例车辆设计2024-05-08
-
野马Mach 1雾灯支架模型2024-05-08
-
Nylint消音器2024-05-08
-
Taco Bell国际象棋车装饰品2024-05-08