Dillon RF100 连接器预装管支架
Dillon Primer Tube Hanger for RF100 connectors
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
I really like the original design, but it didn't fit with the RF100 connectors (https://www.thingiverse.com/thing:2790739), so I wanted to mod the original. Unfortunately I was getting some errors, so I just ended up just resizing it until it fit vs. CAD'n it from scratch.
I ended resizing it to 125% on the X and Y and leaving the Z the same. Yes, it does stretch the diameter of the case feeder rim out a little, but it still works. You can use double sided tape if you feel it's not tight enough.
Thanks for the design!
Printed with PETG, 15% infill, no supports, 0.14mm layer height, brim for adhesion.
Tags
License
Dillon Primer Tube Hanger for RF100 connectors
by triggermeister is licensed under the Creative Commons - Attribution license.
相关内容
联系我们
热门推荐
-
Aquara壁安装支架2023-04-26 -
KABA DORMA 钥匙盖 3D模型2023-04-27 -
蓝色带刺贝壳3D模型模板2023-05-22 -
塔米亚 TA01 TA02 冲击塔2024-01-17 -
适用于Raspberry Pi5的多功能适配器外壳2025-07-27
最热下载
-
Toyota 22RE发动机扩展套件2023-03-26 -
MK47 模组道具枪2023-03-26 -
吸血鬼之夜2024-01-15 -
QC USB充电器外壳（XFW-KC42-4）2024-01-17 -
JeNo 3" 笼罩 DJI O3 + 支架 + 电池保护 + 40° 防撞器2024-04-19
最新模型
-
6米共线相位块结构2024-05-08 -
4x4方块连接结构2024-05-08 -
装饰艺术风格灯罩适用于GRÖNÖ灯2号2024-05-06 -
Fender Piping（凯德）2024-05-06 -
小型乐高宇宙战舰展示底座2024-05-06