倒置的马森罐水族馆鱼瞭望台

Inverted Mason Jar Aquarium Fish Lookout Tower

2023-08-18 17:33:26

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Want your curious fishies to swim up above your aquarium? Here's what you need!

I've seen these things sold on Etsy, but never found any files. So I designed this.
You will need a wide mouth Mason or Kerr jar.
Use an aquarium safe PLA, and print with at least 50% infill.
Ensure your printer is well tuned for gap bridging, and Z adjusted so it doesnt elephant foot your print. You'll need to print 2 rails, and 1 jar mount.

How to use: Test the rails slide into the mount smoothly, and lock in place. Screw the mount onto the jar, noting orientation. Submerge the jar and let all the air bubble out. Invert the jar, and hold it into position against the glass, being careful to not allow air in. Slide the rails into the mount, hooking onto your tank, adjusting height as needed. The mount has locks for the rails that can be bent outwards to release.

NOTE: This is my first version, and the hooks are designed specifically for my own 10 gallon aquarium (unknown manufacturer). I'll upload a hook for Aqueon tanks soon, or you can simply remix the rails to fit your tank.

UPDATE: I've uploaded version 2. Should be much stronger. I'm currently printing it to test.
UPDATE: I've made some changes again. V3 uploaded.
UPDATE: Alright, last revision on the mount itself. It should print without bridging issues. Now we need more hooks...
UPDATE: 10 Gallon Aqueon tank rail uploaded.

Print Settings

Printer:
Doesn't matter
Rafts:
No
Supports:
No
Infill:
50% +
Filament brand:
Doesn't matter
Filament material:
Aquarium safe PLA
Notes:
No supports needed, as long as your gap bridging performance is good. Also be sure your Z is calibrated well, and you don't have elephant foot issues.

Print the main unit, and 2 rails.