感知世界 LUT5现场监控外部风机 housing

FeelWorld LUT5 Field Monitor External Fan Housing

2023-08-19 06:53:48

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a 40mm fan housing for the FeelWorld Ultra Bright LUT5 field monitor. In direct sunlight the FeelWorld LUT5 monitor can overheat and shut down. The internal fan is just not enough to keep the monitor cool in full brightness mode. I designed this housing to hold 2 40mm, 5 volt box fans and a small buck converter that has a plug that will connect to the 8 volt output on the monitor. You must remove the two screws that hold the housing on the right of the battery hookup and remove the housing. The fans will mount in that location. I use double sided foam tape to hold the whole unit on the monitor. You do not have to use a buck converter to lower the 8 volts down to 5 volts but it is recommended. The fans will come on when the monitor is powered on.