雨世界收集器罐

Rain World Iterator Can

2024-05-05 01:20:06

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Iterator Can from Rain World

Print Settings

Printer brand:
UltiMaker
Printer:
Ultimaker 2+ Connect
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
100%
Infill:
20%
Filament brand:
///
Filament color:
Silver
Filament material:
PLA
Notes:
For better details, print bigger, the one in the images is 100% size.

Post-Printing

Assembling the Iterator

The Carcass:
-The pieces are made to fit perfectly, which is not always the case. Any bits that struggle to fit can be sanded down a bit to fit better;
-the gap at the top of The Walls is meant to fit Metropolis, keep it side up;
-the gaps at the top of the main faces of the iterator are meant to line up with Metropolis, also keep it size up;
-Glue struggles to adhere to PLA, you can lighthly sand the faces where the glue is going to stick to help it.

The Legs:
-You may notice that The Leg doesn't fit into the socket. To attach it, follow this:

Image 1. With fire, melt the very tip of the Leg's connection piece
Image 2. While it's hot, glue it to one of the attaching rods
Image 3. Melt the tips of the rod so its the same width of the connection piece
Image 4. Immediatly connect the Leg to the socket

The Lizard Dens:
-The lizard dens may also not fit, to attach it, follow the same process of The Legs. Burn the tips of the double rods --> attach to ball --> burn the other tip --> attach to iterator.