舒适拥抱者

Snug Huggers

2024-01-08 11:54:49

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This shoe tree allows the printed form to not only hold the shape of a slipper, it createds contact with the interior of the slipper, something that is useful when the form is printed with Copper3D PLACTIVE AN1 filament. Laboratory studies confirm PLACTIVE rapidly reduces colony forming units of common microbes, including Staphylococcus aureus MRSA and Escherichia coli DH5α, achieving more than 99.99% elimination within 24 hours.

You can make a different sole part by outlining your foot instead of using the model part here or resize this sole part in modeling software before printing. After printing, the model can be cut with scissors to fit your slipper or similar shaped shoe.

I printed the models shown in the photograph with a 0.6 nozzle on a CR-10 mini printer.

Print Settings

Notes:
Top and bottom layers should be reduced to 1 in your slicer. With a 0.4 nozzle, you will have a more pliable print if you decrease the z-height of the model to 0.4.