3D 模型：蝴蝶刀玩具（无需硬件）

Butterfly Knife / Balisong Toy (No Hardware Needed)

2023-08-18 17:33:26

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a toy Butterfly Knife / Balisong I designed. No metal hardware such as screws or bolts are needed.

Check out my other design.
https://www.thingiverse.com/thing:6403185

Print Settings

Printer brand:
Anycubic
Printer:
Vyper
Rafts:
No
Supports:
No
Resolution:
0.1 mm
Infill:
100%
Filament brand:
Polymaker
Filament material:
PLA PRO
Notes:
This is designed with very tight tolerances so print quality is very important. Two slicer settings that I would recommend tweaking are print resolution (smaller is better) and outer wall speed (20 mm/s is good). If your still having problems with the screw tolerances you can try shrinking them in the x and y directions.

Post-Printing

Assembly Instructions

The first step for assembly is to separate the handles and blade from their bases. Firmly grip the base and snap it off. Next, use small pliers to remove the supports from the pin holes at the top of the handles and bottom of the blade. File down any material left in the pin holes from the supports. I recommend using a small circular file but a knife would also work.
The blade pins should have a very loose fit with the blade and a tight fit with the handles. Also check the fit between the blade and the handles. If it is too tight and does not rotate smoothly, file down the inside surfaces of the handles until it rotates smoothly. Once everything fits together smoothly, use a flat head screwdriver to screw the pins in place. I would also recommend applying a plastic lubricant on all contact surfaces.