游戏机控制杆间隔套件
Arcade stick spacers
2023-08-18 19:31:36
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Simple spacers for Modular Arcade Fightstick
Use them to if you feel like the stick is too high or doesnt fit like some Korean sticks.
Crown/Samducksa 309MJ
- Medium Jacket (thus MJ) variant has a jacket of ~5mm and cant be mounted directly to a flat surface. The spacer adapts for that.
Sanwa JLF (and other japanese sticks)
- Adjusts the distance from the top of the cover to the end of the balltop to be more like in commercial cases, which have mounts on the underside. (Measured on Hori Fighting Edge)
Hori Hayabusa
- Although Sanwa's will fit mountingwise, hori's hayabusa base is wider and it'd be nice to use it all
- Todo :)
Note:
The spacers go between the top metal plate of the stick assembly and the back side of 3D printed top cover. The thickness of some spacers is calculated based on the thickness of top cover, because the most useful measurement is how high the grip handle is above the profile of the case.
Print Settings
- Rafts:No
- Supports:No
- Notes:
Printed face down
Tags
License
CC BY
Arcade stick spacers
by CyberDNIWE is licensed under the Creative Commons - Attribution license.
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
联系我们
邮箱: 289047960@qq.com
热门推荐
-
马扎达 HE09-32-201 弹簧缓冲单元2023-03-26 -
Heelys插件（中型）2023-03-27 -
幽灵骑士：Ed-sept7作品2023-05-13 -
缝纫长度板（针）- 逊尼威尔 REX 607、康瑟W CP206R、赛尔莱特 LS12024-03-17 -
3D模型：肩部按钮模块V0.1B2024-03-25
最热下载
-
怪兽大战：1998版2023-03-26 -
可定制像素珠子照片面板2023-03-26 -
欧宝Zafira B倒挡锁止机构（倒挡防误入装置）2024-04-02 -
GLOCK 17型手枪2024-05-03
最新模型
-
3d打印全向自行车（部分金属在文件里面包含CAD图纸）2025-07-25 -
HGX lite v2支架2025-07-18 -
hgx挤出机头火炮响尾蛇 X3 SWX3 HGX lite 2.002025-07-18 -
丰满跪姿美熟女2025-07-16 -
锅盖收纳锅盖放置挂钩-能防止12cm到32cm尺寸的锅盖2025-06-24