树莓派游戏机柜（约1/4尺寸）

Arcade Cabinet for Raspberry Pi (Approx 1/4th Scale)

2024-05-03 18:54:15

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Here we have an approximate ¼ scale Arcade Cabinet powered by Raspberry Pi 3B+ or 4B. This model will give you all the components to build your own. This is a remix of the one from herehttps://www.printables.com/model/114617-quarter-scale-joust-inspired-arcade-with-mmu2-platwhich is a fantastic design. I have added variations, options and improvements to further advance the model.

NB what you use for the software is entirely your choice and I do not venture much into getting that up and running in this build. There are 100's of tutorials for Retropie, Batocera etc so Google is your friend.

One of my favourite arcade games is Captain Commando so I decided to base my cabinet on that game. I have included rough templates for the decals and also a PDF build guide in the Files section.

Please also note this can be quite an advanced challenging and costly build and may require some “on the fly” modification. I managed to build mine with minimal soldering but it is possible to do it without any soldering at all.

Dimensions 46 cm tall by 17 cm deep by 17 cm wide

Enjoy.

Print Settings

Printer brand:
ELEGOO
Printer:
ELEGOO NEPTUNE 3 Pro
Supports:
Yes
Resolution:
0.2mm
Infill:
20% > various
Filament brand:
Elegoo
Filament color:
Black
Filament material:
PLA+
Notes:
Monitor Mount and bezel use 100% infill
Cabinet Marquee Blank 5-10% infill in White PLA if using with the LED light to luminate the marquee
All joystick parts recommend 100% infill at least 0.15mm res