特斯拉无线充电器适配器（iPhone 13/14 Pro）

Tesla Wireless Charger Adapter for iPhone 13/14/pro

2023-08-18 23:19:39

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a remix of TStarke97's very well designed Tesla S adapter for an Apple MagSafe wireless charger. I found three problems with the original design:

It did not permit an iPhone 13/14/pro to lay flat against the adapter - there needed to be a notch for the camera lenses bump.
I wanted to use a wireless charger off Amazon that was all black and the size of that adapter was about 0.1mm too wide and 0.1mm too thick for the original hole.
The groove in the back where the charger wire would run was too shallow to accommodate the section of the charger wire at the charger puck where there is extra insulation around the wire as well as the raised ridge on the Tesla mounting area. This was true for the Apple and Amazon charger.

To fix all of the above, I added the notch at the top of the bracket to accommodate the camera lens bump on the 13/14 Pro phones. To make room for the notch, I moved the charger puck recess down about 5mm, deepened it by 0.1mm and increased the recess width by a little less than 0.1mm. I increased the depth of the groove for the charger wire by 1.5mm. Now the Amazon charger fits perfectly and my iPhone 14 Pro sits flush. My wife's iPhone SE also charges fine on the charger so suspect it will now work with most iPhone models, especially the 13/14 pro versions with the large camera lens bump. Anything without a large bump should work.

The charge I bought from Amazon is https://www.amazon.com/dp/B0BBTFWCMB?ref=ppx_yo2ov_dt_b_product_details&th=1

"Magnetic Wireless Charger Compatible with MagSafe Charger, iPhone Mag Safe Charger for iPhone..." by YLLZI