快速更换参数化水管手柄

Quick Change Parametric Tap Handles

2023-08-18 23:33:22

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Inspired (but not really using anything from) the tap handle insert this was remixed from, this approach uses friction fit tap handles that you can add a logo or words to. Included is an almost entirely constrained fusion 360 file that you can just open and change to change the words.

Improvements over the previous design:

Uses roughly 1/10th of the amount of filament.
Prints a vertical tap handle, so you can fit them side-by-side.
Prints without supports.
The tap can screw in.

I printed them in two color with a single filament change.

Its extremely likely that the screw will not work right for you. That's what the scad file is for. Test it out and expand/contract the screw size to fit whatever size hole your printer produces.

I also highly recommend buying a 3/8"-16 tap to cut out any drips/excess material to make threads absolutely perfect.

Buying brass inserts is fairly silly. This is not a high load application and the plastic will last nearly forever under normal use.

Print Settings

Rafts:
No
Supports:
No
Notes:
Obviously PETG or stronger will work better for the screw portion than PLA, but I've had success with PLA as well.

In case it isn't obvious, printing the base with the smallest end on the build plate will probably produce the best results.