Prusa MK3S 希腊丝使用指南

Prusa MK3S filament guide for heated Dry box

2023-08-19 02:40:55

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is an old design of mine that allowed me to consistently print with PETG using a filament dryer. It uses slotted M4 nuts and M4 screws (I don't remember the lengths). I always considered redesigning but due to its reliability I just never really needed to. I probably have 1000+ print hours running this. I even use it for ninja flex TPU with a shore hardness of 85A.

This bolts onto the Prusa MK3s using some unused M3 holes on the frame just above the electronics box.

I use some push to connect (one-touch fittings) that thread into this design. I just bought a cheap kit from amazon that had the stuff I needed. Link below.

https://www.amazon.com/gp/product/B098QL6Y58/ref=ppx_yo_dt_b_search_asin_image?ie=UTF8&psc=1

The filament dryer I am using is also off amazon.

https://www.amazon.com/gp/product/B09WQLH1PQ/ref=ppx_yo_dt_b_search_asin_image?ie=UTF8&psc=1

Print Settings

Supports:
Yes
Notes:
I always use 4 parameters to increase the rigidity. Nut slots are notorious for having the nut twisting inside so adding more parameters is a must with this. If I was to redesign I would use heat-serts instead.