适用于Prusa MK3/MK4打印机框架的Raspberry Pi持有者

Raspberry Pi Holder for Prusa MK3/MK4 Frame

2024-03-25 20:27:08

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I used Boogie's "Case holder for "Malolo's Raspberry Pi 4 Model B Case" with fan" and added the frame snap so it can be snapped on to the frame of my Prusa MK4.

For better pictures I put this on the front of the frame. For better results It would work better on the rear of the frame. The bottom does not go any lower than the frame so it will not interfere with any of the moving parts. There is some clearance in this bracket to possibly allow for slightly larger cases than the one mentioned below. I would recommend you get some measurements before proceeding.

I am using this setup with Octoprint. Waiting for some shorter cables to come in to make this setup a lot cleaner.

The Original model is here:

https://www.printables.com/model/13649-case-holder-for-malolos-raspberry-pi-4-model-b-cas

And the case is here:

https://www.printables.com/model/4074-malolos-screw-less-snap-fit-raspberry-pi-4-model-b