16寸笔记本支架

Laptop Stand 16inch

2023-08-19 03:33:53

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Hey guys,

this laptop stand was a design for my Asus Rog Strix SCAR 16 2023.

The max. recommended laptop size is 354mm (wide) x 265mm (depth) which perfectly fits at the lift plate.

The frame is split in two pieces to make it printable in one print on my bambu lab x1c, you may have to play tetris to get it on one plate but its definitly possible.
If printed correctly it is designed to fit together tightly without glue.

I printed it with ABS+ from eSUN, with 0.2 resolution and without supports.

Recommended built space is at least ~250mmx250mm.

You actually can use wider laptops but then the plate connections will not close completly and may get unstable.

The stand flexes a bit under heavy laptop since it has a "floating" design, but it can carry my gaming laptop with around 2.5kg load without problems and also gets a soft ankle towards the unsupported side.