可动连接带

Articulating Belt

2023-08-19 10:13:28

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a fully articulating belt I designed in SolidWorks for a Hawks (My Hero Academia) cosplay, but this belt may also be adapted as a Batman belt or for any similar costume.

The belt is assembled from individual links which I printed separately and then snapped together with a small amount of force. Each link adds an effective length of 30cm to the belt and the buckle adds 40cm. The plain, flex, and H links are able to fit through standard belt loops on jeans but the attachment links and buckle will need wider loops if you plane to wear it that way.

All the files are unsupported. 5 files in total: plane link, flex link, attachment link, H link and buckle.

There are five different types of links: plain link, flex link which are deformable for in case you don't want to risk breaking any links when snapping them together, attachment link which I designed so that I could attach some pouches to the belt more easily, and H links which are two links that when joined together make and H.
The buckle is made up of two parts which may be connected to the other links in the same way and snapped together to close the belt.

I printed all links in PLA on a Prusa MK3 with default settings in Cura Slicer and the belt moves and holds together well as long as your not doing parkour.