皮革剪切工具

Leather Splitter

2023-08-19 10:26:51

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This leather splitter is a work in progress and my first big project. I am a hobbyist and can't guarantee that this will work for you. Fusion file is included so improvements can be made by who ever. Photos are from my first build with what ever I had laying around. Will update soon. Listed hardware should work better.

Hardware Needed

1 M8 x 120 Hex Head Bolts
1 M8 X 20 Flat Head Socket
4 M8 x 40 Hex Head Bolts
2 M5 x 40 Socket Head Bolt
4 M5 x 30 Socket Head Bolt
2 M5 x 20 Socket Head Bolt
4 M8 x 1.25 Nuts
2 M8 x 1.25 Lock Nuts
6 M5 x 0.8 Nuts
12 #8 Washers
4 #5 Washers
4 Phillips head Screws
2 Medium washers with 8mm Inner Diameter
2 608-2rs bearings
2 1.5" heavy springs. The heavier the better.
1 box cutter blade.

I printed everything at 99% infill just for strength purposes. I'm sure you could get away with doing 75% but I wouldn't go any lower than that. IF YOU CHOOSE TO DECREASE INFILL YOU NEED TO INCREASE WALLS. This way the threads will have something to grab into. I would not print the levers at anything less than 90%.

Print the body and roller with supports

Print lever and mirrored lever to compliment. Holes are not centered on bottom. Longer end must be installed facing down.

I mounted mine to a plank of wood so I could clamp it to my work bench.

I will be writing instructions on how to assemble this week. I will also be shooting an assembly video soon. If you have any questions you can reach out to me on reddit or here.