滑板手柄(Meepo Mini2S)
Skateboard Handle(Meepo Mini2S)
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Hi Guys,
Every day I have to walk with my board through a large train station, so I created this helpful handle I made for my Mini2S. I suspect it might fit other boards, but haven't been able to test that.
Here is the link if you want to use the CAD: https://cad.onshape.com/documents/1acbee5e3e6a5cd9478418f0/v/9458b95d4a7917d7112bb266/e/98bb2ca69430d585c00f3e98?renderMode=0&uiState=64e0e9d6dd28b44be959fcab
PRINTING: I used 3 Walls and 100% Infill
BOM:
-3D Printed Handle
-10-32 Heat Set Inserts https://www.mcmaster.com/93365A154/
-1" 10-32 Bolts https://www.mcmaster.com/90128A947/(Or hardware store)
INSTALLATION INSTRUCTIONS:
- Use a soldering iron to sink 3 heat-set inserts into the handle
- Shimmy the handle onto the board where you want it.
- Use your drill bit to mark the 3 hole locations.
- Take the handle off(so we can avoid drilling into the inserts)
- Drill the 3 holes in the marked locations
- Put the handle back on and tighten the 10-32, 1" length bolts
I have tested this without issue for about 5 months. Let me know if you make this!
Tags
License
Skateboard Handle(Meepo Mini2S)
by Cmastoras is licensed under the Creative Commons - Attribution license.
相关内容
联系我们
最新模型
-
西斯热力炸弹墙挂架2024-05-08 -
母亲节墙面艺术2024-05-08 -
魔术子弹搅拌机 (MBR-1101) - 电机安装底座齿轮更换2024-05-08 -
电脑风扇独立式模型2024-05-06 -
参数化设计的安全防护临时门锁插销2024-05-06
最热下载
-
星际飞船发射塔与起爆平台（1:144比例）2023-03-26 -
Queen Anne Revenge 船2023-03-26 -
精灵族森林守护者A2023-03-26 -
21700毫安电池单元保持架2024-04-06
