伊瑟宁加德骰子塔（奥斯坦克）

Isengard Dice Tower (Orthanc)

2024-01-17 05:02:26

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

They're taking the Hobbits to Isengard!!!!

3D printable Orthanc dice tower!

Instructions:

This whole print fits on my Creality CR 10, but feel free to print chunks 1 through 4 and glue together. Chunk 4 is too big for the base Ender, so I also broke chunk 4 into 3 parts if needed. the non-dice tower version is also available (no hole down the middle). Fits standard D6-D20 dice, do not scale when printing.

To finish off the print, and prevent dice from rocketing out the bottom, I created a flap at the entrance to slow the dice down using some black electrical tape (see last picture), but feel free to come up with your own solution (or not, works fine without!)

See more details on my IG post: https://www.instagram.com/dylanmandelbaum/p/CV0rZZIv7IZ/?hl=en&img_index=2