WIP - 2.1电脑扬声器系统

WIP - 2.1 PC Speaker System

2023-08-20 04:02:49

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

WORK IN PROGRESS, placeholder project to publish files as they are created.
Description will follow

Used Hardware

Sattelite Speakers:

I would suggest going for the Dayton since it produces a more natural and fitting sound with the tweeters working from 8khz upwards. The Peerless Fullrange drivers are more optimized towards the high frequencies, which are not needed in this setup, and lacking low end for that, whereas the dayton has no such optimization and can play lower.

For good measure: both are compatible with the front plate, im providing clamp options for both speakers.

Drivers

Tweeter: Peerless - OX20SC00-04
Mid/Fullrange option 1: Peerless by Typhany - TC7FD00-04
Mid/Fullrange option 2: Dayton PC68-4

Other Parts (per speaker)

12 x m3 8mm button head screws
2 x GX12 Aviation Plug 4 pin

Amps

TinySine TSA7804C - 4x50W + DSP

The build in DSP actually has 8 channels, but only 4 are used and broken out on the board.
To get the woofer hooked up as well we need to solder some really thin wire onto the ADAU1701 chip legs and get at least one of the inbuilt DAC's output routed externally to use it for our woofer