HO比例 32G 镀锌垃圾桶 3D模型

HO scale 32g Galvanized Garbage Can

2023-08-20 04:55:55

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a model of a 32g galvanized garbage can meant to be printed on a resin 3D printer. It has been modified so that it will print successfully. The penny is shown for scale.

Print Settings

Printer brand:
ELEGOO
Printer:
ELEGOO MARS 3
Supports:
Yes
Resolution:
default
Filament brand:
Elegoo
Filament color:
Grey
Filament material:
Standard resin
Notes:
I used the default supports from the build plate to the trash can in Chitubox (the free version). I have test printed it to make sure that the model is usable.

Post-Printing

Trash bags made out of Q-Tips

I took Q-Tips and coated them with Elmer's white glue and let them dry. I then painted them with some black acrylic flat paint and cut them off to sit in the cans.

How I Designed This

Drawn in scale

I started by converting the dimensions in inches to HO scale by dividing them by 87. Then converted inches to mm by multiplying by 25.4.

Once I had it drawn to scale in Fusion360 I began to make alterations in order for it to print on my resin printer. Some items like the wall thickness had to be increased in order to be able to print. Therefore it is not exactly like a 32g galvanized garbage can but if you look at it painted you know what it is.

After curing it I painted it with some Vallejo silver (71.063) paint, next a coat of Vallejo gunmetal (71.072) which was watered down (1 drop of paint and 4 drops of water). After that I used a piece of a grout sponge to apply some red rust acrylic craft paint and some burnt umber acrylic craft paint.

The end goal was to create some old and well used garbage cans for my HO train layout. No lids since in real life they disappear within a week or two of putting the new can out by the road. I will put garbage in them at some point later.