260mm（11英寸）平衡型香料架，用于4英寸懒苏转盘轴承

Balanced 260mm (11") Spice Rack, for 4" lazy susan turntable bearing

2023-08-20 06:29:08

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I modeled this in an afternoon for my folks, because I had used the same bearing in my food dehydrator dry box project. This design has circular spice cutouts, so the spices do not shift around, and every cutout is spaced the exact same distance from the center. This ensures the rack has evenly distributed weight, giving a perfectly smooth, wobble-free spin.

The rack is designed to barely fit an 11" deep by 9" high shelf space:

It will slightly edge over the shelf lip, and into the void behind the cabinet door.
It will hold 13 McCormick size (48mm), and four large "Johnny's Salt" size (58mm).
It will hold four half-height (48mm) spices, with enough clearance to lift and remove.

The bearings I used are $5/ea or $7/2pk: https://www.amazon.com/dp/B0B6J2TXWK/
I used CA glue to bond the printed pieces, and the turntable bearing corner tabs.
The base (under the bearing), and the main rack (over the bearing), are recessed with a 95mm wide square cutout, that centers the turntable bearing.

You'll need to print these pieces together, for one complete unit: