勇敢型4x5视觉反射观察保护罩
Intrepid 4x5 Reflex viewing hood
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Story
I already have a hood I created with the help of a friend but I was still dealing with the image being upside down. And looking at the cost of reflex viewfinders, I was not interested in spending that kind of money. Plus, what are 3D printers for after all eh?
You'll note that this is meant to use in portrait mode, but with the Intrepid already having a rotating back, you'll just be viewing from the side.
Additional parts
The lens used at the top can be purchased here:
https://a.co/d/6PMoMbt
The mirror can be purchased at Hobby Lobby here:
https://www.hobbylobby.com/Crafts-Hobbies/Glass-Crafting/Mirrors/Rectangle-Craft-Mirrors---4%22-x-5%22/p/22813
Print Settings
- Printer brand:
Creality
- Printer:
Ender-6
- Rafts:No
- Supports:No
- Infill:Variable
- Filament brand:
Polyterra
- Filament color:
Black
- Filament material:
PLA
- Notes:
the infill is variable up to you, but I used 25% on the "Front" piece. I also increased the number of perimeters on the other two parts so it eliminated needing infills.
Post-Printing
Post Printing
Glue the pieces together with crazy glue and they will hold just fine.
Tags
License
Intrepid 4x5 Reflex viewing hood
by kolo92 is licensed under the Creative Commons - Attribution license.
相关内容
猜你喜欢
联系我们
热门推荐
-
8.6毫米黑暗模式，口袋快扣模块弹药盒2023-03-26 -
Geeetech A10 DD Orbiter 2.4 E3dV62023-04-21 -
丰田RAV4车门座椅夹板螺栓更换2024-04-20 -
安益卡通 i3 迷你 HGX 轻量挤出器2024-04-21 -
女式凉鞋2025-07-16
最热下载
-
Makergear M3 M2喷嘴标签2024-03-27 -
空客操纵杆配备控制杆固定装置2024-03-30 -
Arduino或5V继电器控制板固定架2024-04-02 -
花环戒指2024-05-08
最新模型
-
大码动漫女战士2025-07-15 -
Wii 遥控器（同步按钮）3D模型2024-05-08 -
Pokemon Go 社区日第86次 # Bounsweet 鸣泉2024-05-08 -
3D模型标题：吊坠 2.75厘米2024-05-08 -
科巴尔特 24V电池固定架2024-05-06