IBM PS/2 P70 / P75 键盘锁定维修指南

IBM PS/2 P70 / P75 keyboard lock repair

2023-08-20 07:09:07

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

A repair part for the IBM PS/2 portable computer for a broken latch/lever/lock of the keyboard.

Before you begin, be aware that you have to remove the top of the keyboard case. That is not an easy job. Be sure there are no children around. You will use every curse word you know and probably make up some new ones.
A very useful page is: http://sandy55.fc2web.com/keyboard/ibm_p7x_en.html (also added as pdf in case it is removed). Also added some wedges which can be handy to open your case without damaging it unnecessary.

I printed the repair part in ASA (ABS) and it is pretty solid.
Clean the broken part with a file so it is flat. Slide the part over the remaining part as far as you can. Test it before closing the case again. If it is difficult to move after closing, some silicone spray can help. Do not glue it in, not necessary and not reversable.

The part you see in the pictures was the first prototype, the definitive part is a little more refined.

Happy restoring :)

Print Settings

Printer:
Bambu Lab X1
Supports:
No
Resolution:
0.2
Filament brand:
filamentum
Filament color:
black
Filament material:
ASA
Notes:
Print the part top down, it is a small part so a brim can be usefull. The part is pretty strong as it is, if you need to file it down for some reason, do not overdo it, you will seriously weaken the part.