景观刺
Landscaping Spike
2023-08-20 11:08:38
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This is my take on a landscaping spike that you would use to anchor down landscaping fabric or in my case, a mulch barrier/divider.
I didn't think Paying over $1+tax to the big box stores was worth it when I need so many plus I have a 3D printer.
Its a amature design but I was desperate and gave it my best.
Modeled off of the Vigoro 8 in. Anchoring Landscape Spike. Mines not the full 8" but I don't think its needed as of yet.
In theory, you could print 150ish of these on (1) 1kg spool. Give or take depending on nozzle. I used 0.6
Print Settings
- Printer brand:
Anycubic
- Printer:
Kobra Max
- Rafts:No
- Supports:No
- Resolution:0.6
- Filament brand:
Inland
- Filament color:
Orange
- Filament material:
Pla Tough
- Notes:
Used a brim on the head to help hold it to the build plate.
Tags
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
联系我们
邮箱: 289047960@qq.com
热门推荐
-
弓箭和投射器战车前轮2023-04-12 -
网格无限度3×1型洛克泰胶棒收纳盒2023-06-28 -
乔治电影院——装饰艺术2024-04-30 -
电源已开启2024-05-03 -
20毫米真实管道连接件2024-05-05
最热下载
-
分形手玩星2023-03-26 -
QC USB充电器外壳（XFW-KC42-4）2024-01-17 -
替换式膨胀喷嘴，适用于FLEXTAILGEAR小型泵。2024-03-18 -
原始控制舱2024-03-25 -
Enders 3版控制面板2024-05-08
最新模型
-
V版鲁比克立方体2024-05-08 -
3.5寸硬盘驱动器到四个2.5寸硬盘驱动器适配器（Nox Hummer Spark）2024-05-08 -
石蜂小屋2024-05-08 -
塞勒斯尼亚锁扣2024-05-06 -
Scirocco MK2 后排座椅夹2024-05-06