Controller Display Stands - Mega Drive, SNES, Master System

Controller Display Stands - Megadrive, SNES, Master System

2023-08-20 13:08:15

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Controller Display Stands - Mega Drive, SNES, Master System

Summary

These stands are for displaying your controllers on a shelf.

They are very close in design to various other stands on thingiverse, but with the aim of having a consistent design for being shown side by side, and with the controllers ending up at similar vertical heights. Not shown in the photograph, but there are variants for the SNES controller with either SNES or Super Famicom logo.

The cable can be wrapped on the back section and plugged into the left side of the stand.

As a caution to those printing the Sega models, getting a close fitting holder for the DE-9 connectors was tricky. I believe most of the hold in an actual connector comes from the pins themselves. The sizes in these models are a good fit for the OEM controllers that I have, but when testing with some aftermarket controllers I was left with a very loose fit. I'd be interested to hear if this causes issues for anybody else.