Wolwern MTW 喂料管（原材料锭，前Oct 2021）

Wolverine MTW Feeding Tube (Billet pre Oct 2021)

2023-08-20 16:42:10

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Built from scratch in TinkerCAD, so it may not be the most polished model. Have tested with Wolverine and PTS mags, no feed issues on my set up.

Depending on your printer/print settings the feed tube may be tight for bbs to pass through if there's a "seam" inside the tube. I found a bit of sand paper wrapped around a cleaning rod resolved this (and then cleaning grit out afterwards). Tube is deliberately snug to reduce air loss past following bbs (i don't know if it actually makes a difference though)