可用3D打印的骑行高度计

Ride Height Gauge That Actually Works Well When 3D Printed

2023-08-20 17:08:51

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I have finally come to this final design after testing and trialing several other ones that failed miserably.

It is a ride height gauge for RC cars that goes from 4.5 to 5 to 5.5 to 6 mm.

I'm not going to include any printing recommendations because I know your probably not going to listen to me (I wouldn't)… except I super duper think that 50% infill is probably good because that's what I had and it worked out very well.

Just gonna also let you fellas know that I printed in PLA+ and it worked good as.

I don't have printed on number because I don't know, cant be stuffed, I actually wrote them on after print, you do the same, shut up.

Ok, so this print actually works (others on this site that I've tried have not) so you had better use it. and this is coming from a bloody professional RC man.

It has illustrated "Gauge of Death" on the side because I actually put it on there.

How I Designed This

I wanted to create a gauge that was accurate to at least 0.1 of a mm and I wanted something that could span from around the 4 to 6 mm in height which is what I would typically be actually running on a 1/10 car.

First I designed using 0.2 steps incrementing towards up to 6 but this meant that the whole platform was very, very long and after printing it would be not flat on the ground. I tried to counter this by making the whole thing wide but that did absolutory bloody nothing whatsoever. So I was forced to go up to a 0.5 increment system (I don't care too much about lacking in that fine ride height measurement changes because honestly I probably wont even be able to tell out on the track).