板件分隔器 M5, M6 和 M8
Board Spacers M5, M6 and M8
2023-08-20 23:35:34
使用说明
- 所有模型资源均由用户上传分享,内容来源于网络公开资源
- 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
- 模型将通过邮件发送(5分钟内自动发货),感谢理解带宽压力
关于费用
我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!
扫码手机访问
抖音私信 @jobsfanSummary
I made this metric spacers to lift up electronic boards and other parts.
I have printed them in PLA but I think ABS would be nice to try.
I haven’t tried every one of them so if there is a problem with a specific model pleas massage me.
I used this bolts https://www.thingiverse.com/thing:6186316
Print Settings
- Notes:
0.12mm Fine @BBL X1C Profile
+custom settings:
Wall loops: 3
Outer wall: 100 mm/s
Infill 25 % (i like the cubic infill)
Auter brim (10mm)
Tags
License
CC BY-NC
Board Spacers M3, M5, M6 and M8
by RolfCambodia is licensed under the Creative Commons - Attribution - Non-Commercial license.
朋友,你觉得上面这个模型,属于下面的哪个分类?
必须全中文,且长度不超过15
相关内容
猜你喜欢
联系我们
邮箱: 289047960@qq.com
最新模型
-
Taranis QX7型号运输盖带磁吸支架2024-05-08
-
6米共线相位块结构2024-05-08
-
瑜伽垫固定挂钩2024-05-08
-
PET瓶盖3D模型设计2024-05-08
-
低面数花朵2024-05-06
最热下载
-
通用型1/10比例底盘 - DKS基础款2023-03-26
-
Toyota 22RE发动机扩展套件2023-03-26
-
QC USB充电器外壳(XFW-KC42-4)2024-01-17