智能 Blink 外部摄像头罩
Blink outdoor camera hood
2023-08-20 23:48:45
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Just a simple and easy camera shade, it gives some protection against sun and rain. I found out that longer visors reflect the infrared light into the camera making it very blurry during night vision so i made it a little shorter.
I had an issue with one popping out so i added some tape inside, this might not happen to you since it's a relatively tight fit
I recommend printing it with 100% infill but i also printed one with only the exterior walls and it works fine
Print Settings
- Printer brand:
Creality
- Printer:
Ender 3
- Rafts:Doesn't Matter
- Supports:No
- Resolution:0.3
- Infill:100
- Filament brand:
sunlu
- Filament material:
petg - pla
License
CC BY
Blink outdoor camera hood
by Paolo357 is licensed under the Creative Commons - Attribution license.
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
联系我们
邮箱: 289047960@qq.com
热门推荐
-
Raspberry Pi外壳2023-03-27 -
SnapMaker J1驾驶舱扩展3D模型2023-04-05 -
Dew Shield for Evoguide 50ED2023-08-07 -
Schildkröte Line Tank2023-08-08
最热下载
-
QC USB充电器外壳（XFW-KC42-4）2024-01-17 -
GLOCK 17（第三代）蓝枪2024-04-13 -
硫化机模型2024-04-13 -
Halo Reach巴黎级大型战舰2024-05-05 -
厨房水槽滤网过滤器2025-06-05
最新模型
-
一体打印活动关节熊猫和支架2025-07-25 -
用于加长杆的戴森配件支架2025-07-17 -
鞋撑2025-07-17 -
高跟鞋鞋架2025-07-17 -
一体打印行星齿轮2025-07-15