卡夫KA树脂胸像

Kafka RESIN Bust

2023-08-21 02:02:52

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

PROPERTY OF MIHOYO. USED WITHOUT PERMISSION.

Kafka -- Honkai Star Rail

UPDATE Aug 29, 2023:

here's a youtube 'short' https://www.youtube.com/shorts/2SU8yTYaNjQ

/UPDATE

UPDATE Aug 26, 2023:

thanks to 'printfriek', you now have the full BLEND. please read the instructions below for hollowing and slicing. if you want to export an STL from the BLEND, just open it in the latest blender (or at least 2.79b which is what i use), SELECT ALL (Ctrl-A), then FILE --> EXPORT --> STL. make sure APPLY MODIFIERS and SELECTION ONLY are ticked in the lower left panel. her jacket and a few other accessories are not ready yet. the more prints you show me, the more models i'll release.

END UPDATE

here is the top quarter of kafka. the model split because i paused the print at 62% to add more resin (which i didn't really need). hollow it out in PrusaSlicer at 2.7mm wall with 2.5 closing distance. cut holes in each arm and torso at the bottom. support it from the inside and out with BALL supports because this model is quite heavy and will fall into the vat otherwise.

if you show me some prints, i'll release the whole BLEND.

this pose is the end of her basic attack animation.