高端系列2号双电荷支架
Elite series 2 Dual Charge Mount
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Remix of JAGS3 Xbox Elite Controller Gen 2 Stand.
I couldn't find anything that was made to hold two controllers. This is a simple merge of two of the original stands, with a large tray in between.
-With both controllers charging, there is about 10mm of space between the grips.
-I chamfered the bottom corners of all the trays, to make it easier to grab things sitting in them.
Besides that, this is unchanged from the original design. I forgot to remove the "AC" from the face, but it can be done with the Fusion360 file if needed.
Print on base, with supports for the logo if desired.
Print Settings
- Printer brand:
Artillery
- Printer:
Artillery Sidewinder X1
- Resolution:.2mm
- Infill:30%
- Filament brand:
Sunlu
- Filament color:
Black
- Filament material:
PLA+
- Notes:
Printed at 215c with bed at 60c.
70mm/s speed
Tags
License
Elite series 2 Dual Charge Mount
by eng89 is licensed under the Creative Commons - Attribution license.
相关内容
猜你喜欢
联系我们
热门推荐
-
J70火车（托比）3D模型2023-04-03 -
Fondue skewer organizer2023-09-07 -
乌克里乐五声音阶结构模型2024-03-19 -
丁丁模型2024-04-22 -
FPV遥控纸飞机（机身）STL 3D模型2025-09-16
最热下载
-
开源 1:10 四驱竞技型 RC 车2025-07-08 -
凯弗·鬼魂追踪者2024-01-18 -
泰坦电视核心升级，升级版泰坦巨人核心2025-07-16 -
用于Raspberry Pi高质量摄像头的D型安装适配器2024-05-08
最新模型
-
Flick 19E（增强型） - 可使用的玩具枪 - 类似弹弓的橡皮筋枪2025-08-21 -
高跟鞋鞋架2025-07-17 -
系带3D凉鞋（儿童款）2025-07-16 -
Sunlu FilaDryer S1 Plus气压计安装支架2024-05-08 -
MK1 下覆盖板夹持物2024-05-06