卡尺固定装置 for IKEA SKÅDIS 板子
Caliper Mount for IKEA SKÅDIS Board
2023-08-21 03:36:52
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
About
This model is a caliper mount for an IKEA SKÅDIS mounting board.
Remix
This is a remix of josteinaj's design. I very much liked the way this was made to be printed without supports.
The changes in this remix is as follows:
- Slightly smaller overall body
- A little more of a symmetrical design
- More rounded edges
- Slightly different hook design
- Print with 100% infill, for a stronger hook and "arms".
- Can be printed without supports if placed upside down, see the last picture.
- Brim might be needed for the two arms.
The model in the pictures was printed with a Bambulab X1C printer at 0.12mm resolution, 100% infill, and with a brim.
Tags
License
CC BY
Caliper Mount for IKEA SKÅDIS Board
by Hopefully_Helpful is licensed under the Creative Commons - Attribution license.
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
联系我们
邮箱: 289047960@qq.com
最新模型
-
任天堂Gamecube排气模型2024-05-08 -
Nest摄像头电源支架2024-05-06 -
晶体聚集体2024-05-06 -
34mm 管道卡 / DOPE 卡持有器 PRS2024-05-06 -
20个威士忌杯托盘支架2024-05-06
最热下载
-
Quansheng UVK6 桌面支架2024-01-10 -
吸血鬼之夜2024-01-15 -
Wolf系列手机支架2024-03-26 -
21700毫安电池单元保持架2024-04-06 -
Enders 3版控制面板2024-05-08