Vileda Total Reflect Plus用于熨烫板脚部
Feet for ironing board Vileda Total Reflect Plus
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This is a foot for an ironing board by Vileda company, model - Total Reflect Plus.
This is improved over a factory default feet for this board as the contact area with the floor is much higher.
After printing you don't need any tools, however I highly recommend adding anti-slip coating at the bottom.
Print Settings
- Printer brand:
Creality
- Printer:
Ender 5
- Rafts:No
- Supports:No
- Infill:20%
- Filament brand:
Fiberlogy
- Filament material:
PET-G
- Notes:
You can print this without any supports (with orientation on longer bottom part). However probably it depends on your printer and filament as well settings.
Infill probably might be much lower, and PLA probably would be plenty of strong for this but I just had this on my printer.
Tags
License
Feet for ironing board Vileda Total Reflect Plus
by mtajchert is licensed under the Creative Commons - Attribution license.
联系我们
最新模型
-
美国机甲——印度神灵MK-72024-05-08 -
简约墙面键帽展示架2024-05-08 -
sourceone v5 HGLRC M100 5883 支架2024-05-06 -
Base Jigkick v2 for psp Baryon Sweeper2024-05-06
最热下载
-
小鸡绘画机（Eggbot衍生版）v1.12023-03-26 -
可打印骰子塔2023-03-26 -
Articulated Snake2024-03-30 -
FFBeast仿真飞行器模拟轮部件2024-04-19 -
幻想磁力2024-05-03