OLM2气动辅助装置与保护措施包括高度测量仪和管道固定装置

OLM2 Air Assist and Protection incl Height measurer and Tube Holder

2023-08-21 05:23:02

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

TL;DR:
Awesome Air Assist with movable protection.
One piece of M9x1 tube connector needed.

INFO:
Without a doubt my best design! I've been using it for over 2 years so the details are a litte bit fuzzy, but printing this will give you a much safer, effective and easier Ortur Laser Master 2.

Air Assist tubing can be connected on the side using a M9x1 connector for 9mm (outer/inner) tube.

The "skirt"/protection can be added do make sure only eyes staring at the beam straight from the side are in the danger zone. Friends and family walking in the room does no longer risk accidentally looking at the laser.

The square hole are for "measurement sticks" (also added here) on which you can draw a line with a pen when you achieve the perfect focus (if your laser has static focal point and can be moved up and down). Getting this perfect focus/distance or any other distance depending on your need (cutting for instance where you want your focal point to be a little bit lower) are now done in a breeze.

The tube holder are optional but makes for a nice and safe tube connection.