创实 Sprite Pro 电缆持有架，适用于 Aquila x2
Creality Sprite Pro Cable Holder on Aquila x2
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This cable holder ,I just printed the bracket sideways, that way no supports are needed. Do not use a raft, only a brim, if necessary, for the holes no supports but a maximum fan, for the pin always stay it stretched out so that it holds the weight of the cable, as well as the ring.
You will only, perhaps, have to do a little finishing to fit the pin hole.
you just need to get two keyrings and a spring a hammer nut M4 with screw
Print Settings
- Printer:
AQUILA X2 Voxelab
- Rafts:Doesn't Matter
- Supports:Doesn't Matter
- Resolution:0.2
- Infill:20
- Filament brand:
Sunlu
- Filament color:
green fluo
- Filament material:
pla
- Notes:
Sunlu recommended print temperatures 200-230°C and print bed temperature 60-80°C
License
Creality Sprite Pro Cable Holder on Aquila x2
by daytek is licensed under the Creative Commons - Attribution license.
相关内容
联系我们
热门推荐
-
Guitar Slider and Pick Holder 3D Model2023-04-03 -
Dr. Dabber XS立体和工具架2023-05-09 -
经典版 Omnitrix V22023-05-15 -
100mm至58mm吸尘管接头2023-08-04 -
自动浇水花盆盖2024-03-27
最热下载
-
通用型1/10比例底盘 - DKS基础款2023-03-26 -
可定制像素珠子照片面板2023-03-26 -
Glock 17/34 Solidworks 模型文件2023-04-21 -
GTA 5 大地图模型2024-04-21 -
厨房水槽滤网过滤器2025-06-05
最新模型
-
适用于Raspberry Pi5的多功能适配器外壳2025-07-27 -
用于加长杆的戴森配件支架2025-07-17 -
巴黎卢浮宫的三圣母像2025-07-16 -
一体打印行星齿轮2025-07-15 -
KALYRA PRIME - 一姐 适合桌面游戏和收藏家的科幻女英雄。2025-07-15