创实 ender 3 S1 专用工具夹持器

Creality ender 3 s1 pro tool holder

2024-04-28 15:48:39

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Tool holder with 2 draws

the screen fit perfect in the front.

I rotate the main part with the slicer to reduce te need to support ( still required for just small hanging section as show in photos) and to Improve the strenght.

for Creality Ender 3 s1 pro. uses the original screws to attach and have holes on the top of the draws to put a stop ( either the ones include in the printing or any other screw that fits).

I use pla+ black and blue filament with the presetting from the creality slicer in low quality and it comes out really good.

The main piece takes around 9 hours and the draws were print together using the slicer ( the take around 5 hours). Times depend on your own settings for the printer.