耳机挂钩

Headphone Holder

2023-08-23 19:33:17

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I got my inspiration for this particular headphone holder from many designs, printables asks if this is a remix, it is not. I did the design on this although it may look similar to others. Anyway, what makes this different from others, 1 is the screw mechanism, it's larger gives you more area to grip it. Second is the direction of the cable management on this, it's underneath the actual headphone holder, but it opens outward making it easier to wrap a few layers of cable under it.

I've tried taking into consideration the differences in mounting surfaces so I've included 2 different screw sizes, for desks that are a little thicker the shorter screw should work, my desk uses thinner wood, so I had to use a little longer screw, so I've made both an Inch and an inch and a half. Also, when using the screw there is the stopper, which also needs to be factored in when determining which screw that you use.

Print Settings

Printer:
Bambulab X1C
Rafts:
Doesn't Matter
Supports:
Yes
Infill:
20%
Notes:
The headphone holder piece is the only piece that I would recommend using supports on, I also recommend printing that piece on its side. I personally went pretty heavy on walls, using my slicer defaults for infill. If you print only 3 walls than the model will flex when tightening it. For me, I didn't like the flex, so I printed with 9 walls. (That gave it strength and less flex) Also, to assist in strength of the model I did print in PLA-CF. (Filament is preference any will work)