联想 Ideapad Z580 摄像头外壳 3D 模型

Lenovo Ideapad Z580 Webcam Enclosure

2023-08-24 00:43:43

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is an enclosure I made in order to house the webcam taken from a Lenovo Ideapad Z580 with a hole so that the camera activity LED can shine through. I also made a sort of clip in order to mount the webcam to a monitor (it's made to fit an AOC E2180SW monitor but may work with others).

To mount the camera inside the enclosure I used a thin double sided tape to stick it to the inside of the housing and the press fitted the lid. If you find that the lid is loose you can use glue to fix it in place I guess.

Then, for mounting the camera to the monitor clip I just used super glue to stick the housing to the clip.

Print Settings

Printer brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
100%
Filament brand:
3N3
Filament color:
Celeste
Filament material:
PLA
Notes:
This is how I printed it, you can print it with any settings you want as this is not a hard print.