夹紧结构-刀具应用

Collet for knife

2023-08-24 02:17:21

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

A set of modeling knives has been lying around for a long time. Everyone has a broken collet in the thread area. Most likely from diligence, I wanted to squeeze it tighter. Then I bought it with a metal collet. And now, when various knives were needed, hands reached the repair. I made models with thread M5 for a small knife type 11 and M6 for large knives.
.
Upd! I removed the holes inside the thread (they were under a thin self-tapping screw 1.6, like an anchor) - it was not required. And also made a thrust wall for the upper edge of the blade in the case of Type-1 and two thrust walls for Type-2. Now the blades don't hang out.