Trend网路 TE100-S5P+ 定制外壳 3D模型

TRENDnet TE100-S5P+ Custom Housing

2023-08-24 03:10:57

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I have a TRENDnet TE100-S5P+ Ethernet Switch which has a broken housing, so I designed this minimal housing for it. I think this is way better than the original one as it has a regular shape which makes it easier to place.

I'D RECOMMEND SCALING THE MODEL BY 101% ON X AND Y AXES.

This is because the model was designed with the actual measurements with no wiggle room, 101% scaling should make the board fit fine (or with a little bit of sanding of the board).

Assembly:
Just use the stock screws to screw the board in the bottom housing and then use any kind of glue you like to glue the top and bottom halves of the housing. I use silicone based glue so that I know that I can take it apart if I need to).

Print Settings

Printer brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
100%
Filament brand:
3N3
Filament color:
Celeste
Filament material:
PLA
Notes:
I'd use brims (or rafts if that's what you fancy) in order to prevent the corners from lifting if you don't trust your adhesion that much.