3dsjs

3D模型:护腕拇指装甲模具

Gauntlet Thumb Armor & Mold

2023-08-24 04:17:45

使用说明

  1. 所有模型资源均由用户上传分享,内容来源于网络公开资源
  2. 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
  3. 模型将通过邮件发送(5分钟内自动发货),感谢理解带宽压力
关于费用

我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!

扫码手机访问
抖音私信 @jobsfan

Summary

This is an OpenSCAD file that can generate a three part mold that you could use to make a forged carbon thumb for a gauntlet. You can also generate and print a thumb as well, but all 3d Printer filaments that I'm aware of would be unsafe to use in actual Lonsword sparring with steel

to use the pre-generated STLs you need to mirror the lower half in your slicer so you have 2 of them and you'll need some bolts to clamp the halves together.

the one STL of the result is so you can get an idea of what it will look like when you cast one (also you can use it to figure out the volume of the resultant solid) in this case it's like

22 cc
if making a CF part that's 60/40 you'd need
18.48 g CF
and 125% that in resin (it will squeeze out, this is more than needed)
23.1 g resin

License

CC BY-NC

Gauntlet Thumb Armor & Mold
by superPorp is licensed under the Creative Commons - Attribution - Non-Commercial license.

3D模型:护腕拇指装甲模具
朋友,你觉得上面这个模型,属于下面的哪个分类?
必须全中文,且长度不超过15

相关内容

猜你喜欢