单块微米计量器支架
Micrometer stand, monoblock
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Micrometer stand 3.0
Loose derivative of the nice design of Wehrenseb
It is a single piece + the knob
Prints without supports from the side. There is also thefile for a knob for M4 hex ("Nipplo")
You will need one screw with hex head, about 50mm long, and one hex nut, M4.
It can be fastened to a heavier base again with M4 screws, or you can put rubber foots.
Uploaded 3 models for the jaw, for different thickness of the micrometer: 7mm (for bare metal manual micrometers), 11 and 15mm for those with plastic sides.
also two sizes of the base. See the name of the file for the size.
Was designed for Xibei /QLR micrometers and has their logo on it.
May improve the design in case of positive/negative feedbacks
Tags
License
Micrometer stand, monoblock
by pattarini is licensed under the Creative Commons - Attribution license.
相关内容
猜你喜欢
联系我们
热门推荐
-
通用型1/10比例底盘 - DKS基础款2023-03-26 -
KABA DORMA 钥匙盖 3D模型2023-04-27 -
帕维尔·切科夫 3D模型角色2023-06-08 -
Peugeot 2008 iPhone Magsafe Holder2023-06-19 -
适用于Raspberry Pi5的多功能适配器外壳2025-07-27
最热下载
-
HexiBox 唐氏 W3-2141 书架式扬声器2025-06-17 -
布恩小恐龙：阿尔洛撕齿兽UpKit - 3DKitbash网2023-03-27 -
Philips 马拉松 FC9225 轮子 飞利浦 Marathon FC9225 轮子2024-03-31 -
21700毫安电池单元保持架2024-04-06 -
Enders 3版控制面板2024-05-08
最新模型
-
基础墙钩2024-05-08 -
适用于任何步进电机的弹簧联轴器2024-05-08 -
芯片夹2024-05-08 -
sourceone v5 HGLRC M100 5883 支架2024-05-06 -
狐狸粉尘密封压机，直径36毫米2024-05-06