RTL-SDR持有者
RTL-SDR Holder
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
To reduce PC-induced noise entering the SDR-RTL via USB and antenna, the RTL-SDR should not be mounted directly to the PC's or any other USB host's (e.g. display) USB connector, but via USB extension cable and ferrite filter element at some distance (say at least half a meter).
When installing the RTL-SDR this way and connecting a long antenna it may tople over. I designed a simple holder to avoid this.
This holder fits the RTL-SDR V3 from www.rtl-sdr.com. You may adapt it to other RTL-SDR dongles, see below.
====================================================================
Update 5 December 2023:
I published an improved version:
https://www.thingiverse.com/thing:6354215
====================================================================
As always I include the OpenSCAD source file for you to adapt and/or improve:
- Download and install OpenSCAD from https://www.openscad.org
- Launch OpenSCAD and open the enclosed OpenSCAD source file (/File/Open).
- Amend the parameters at the top of the source file or even code.
- Save your changes (/File/Save).
- Render the design (/Design/Render).
- Export the rendered design e.g. as a .stl file (/File/Export/Export as STL).
- Slice and print.
See my other designs at
https://www.thingiverse.com/thinger13/designs
Tags
License
RTL-SDR Holder
by Thinger13 is licensed under the Creative Commons - Attribution - Non-Commercial license.
联系我们
最新模型
-
24byj到NEMA17适配器2024-05-08 -
戴森V6 V7吸尘器软垫条端盖2024-05-08 -
宝马E34布罗塞座椅齿轮3D模型2024-05-06 -
3D打印机LM12UU Y轴升降板2024-05-06 -
T细胞支撑结构 - 坚固底座2024-05-06
最热下载
-
模块化抽屉 2.02023-03-26 -
原始控制舱2024-03-25 -
法兰尺寸测量工具（小）2024-04-19 -
定制升降装置 1x1型2024-04-21 -
厨房水槽滤网过滤器2025-06-05