Raspberry Pi CM4 Waveshare Nano Base Board B 外壳

Case for Raspberry Pi CM4 Waveshare Nano Base Board (B)

2023-08-24 17:33:49

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Raspberry Pi CM4 Waveshare Nano Base Board B 外壳

Summary

Case for Raspberry Pi CM4 Waveshare Nano Base Board (B)

Assembly

Print both models
Put the computer in the case (mounted on the Waveshare nano) with the Waveshare board facing the inner face of the case)
Snap the lid on the case with the computer (the clips should be facing the inside of the case so they snap into place in the 3 holes on the case)

Files
lid.stl => model of the lid for the case
case.stl => model for the case of the computer

Sold Separately

Raspberry Pi CM4
Waveshare Nano Base Board (B)
Heatsinks for ICs (optional)

Print Settings
I printed this using a prusa mk4 (0.4mm nozzle) set to 10mm (DETAIL) using Prusament PLA. Supports can be helpful for some of the overhangs, but I found that it doesn't really need them.

Let me know if you run into any issues printing or have any suggestions; I'm new to this and feedback is welcomed. This model doesn't include a hole for the key button or the boot switch on the Waveshare board. The model leaves some of the ICs on the CM4 exposed to keep a small form factor but allow for heatsinks, so be sure to be mindful of this when turning on the computer.